| Tipo | Protocollo | Rete | Caso d'uso tipico |
| FC SAN | Fibre Channel (FCP/SCSI) | Dedicata FC (8/16/32/64 Gbps) | Enterprise, mission-critical, bassa latenza garantita |
| iSCSI SAN | SCSI su TCP/IP | Ethernet standard (1/10/25/100 Gbps) | SMB, remote/branch, cloud, budget contenuto |
| NVMe-oF | NVMe su Fabrics (FC, TCP, RoCE) | Ethernet/FC ad alta velocità | Flash all-flash, ultra-bassa latenza, HPC |
Hardware necessario (es. iSCSI entry-level)
- Array SAN (es. Dell EMC PowerVault, HPE MSA, Synology RackStation, TrueNAS Scale, StarWind)
- Switch Ethernet 10/25 Gbps (dedicato o VLAN isolata per storage)
- Server host con NIC 10/25 Gbps (almeno 2 per multipathing)
- Cavi: Cat6a/Cat7 (RJ45) o DAC/SFP28 (fibre/rame diretto)
- UPS (gruppo continuità) per array e switch
Installazione fisica
- Rack: Montate array e switch in rack ventilato (2U-4U per array entry). Lasciate spazio per cavi e airflow.
- Alimentazione: Collegate array e switch a UPS (PDU ridondate se dual-PSU).
- Cablaggio dati:
- Controller array (porta 0/1) → Switch storage VLAN
- Server host (NIC storage) → Stesso switch
- Management array → Switch management (VLAN separata)
Configurazione logica (esempio generico iSCSI)
- Array: Web UI → Create Pool (RAID 5/6/10) → Create Volume (LUN) → Enable thin provisioning.
- iSCSI Target: Definite IQN target (es.
iqn.2024-01.com.example:san-array1).
- CHAP Authentication: Attivate mutual CHAP (user/password complessi) per sicurezza.
- Allowlist IQN initiator: Solo IQN dei server autorizzati (trovabili in
iscsiadm o iSCSI Initiator Windows).
- Network: IP statici su VLAN storage (es. 10.10.10.x/24), MTU 9000 (Jumbo Frames) end-to-end.
Connessione dagli host (Windows Server / Linux / VMware)
- Windows: iSCSI Initiator → Discovery → Target Portal IP → Connect → Enable Multipath (MPIO).
- Linux:
iscsiadm -m discovery -t st -p 10.10.10.100 → iscsiadm -m node -T iqn... -p 10.10.10.100 --login → multipath -ll.
- VMware ESXi: Storage Adapters → Software iSCSI → Dynamic Discovery → Add Target → Rescan → Datastore → VMFS.
Best practice operative
- VLAN dedicata storage: Isola traffico storage da LAN utenti. Nessun routing tra VLAN storage e altre.
- Jumbo Frames (MTU 9000): Attivate su array, switch, NIC host end-to-end. Riduce overhead CPU/TCP.
- Multipathing (MPIO / DM-Multipath / NMP): Almeno 2 path fisici indipendenti per LUN. Policy Round Robin.
- Monitoraggio: SNMP/Prometheus su array (latency, IOPS, capacity, disk health, rebuild status).
- Backup ≠ Snapshot: Snapshot proteggono da errori logici; backup off-site (Veeam, Commvault, Restic) proteggono da disastro array.
Avvertenze
- Non sovradimensionate: lo storage costa meno ogni anno. Comprate per 18-24 mesi + 30% headroom.
- iSCSI su rete condivisa (senza VLAN/QoS) = prestazioni imprevedibili.
- Single point of failure: single controller, single switch, single path = downtime garantito. Progettate per N+1.